Ferrari TPMS Some Info on Ferrari TPMS and how to set up Ferrari tire pressure sensors - By Dan Rosales 433 Mhz (Euro): Beru Gen 1 RDE 001 Light Gray, Beru Gen 1.5 RDE 001 Orange 1) a technician can set them up using an SD-2/3, which does not require the car to be driven 2) the tire pressure calibration button (or similar name) can be depressed in the "on" ignition position for five seconds before starting and the system will calibrate itself after a 20 minute or so drive. You will see a CAL or similar indication after depressing the button for five seconds. Note: your Ferrari technician can tell how much battery life remains on each TPMS sensor using the SD2/3. He can also set the TPMS ECU to a different tire type if you change to a tire that requires different tire pressures than those originally fitted.
Ferrari TIRE PRESSURE MONITORING SYSTEMS or TPMS are available exclusively at TPMSDIRECT.COM We carry TPMS for all models Ferrari that are factory equipped with TPMS. We only stock original equipment, the same sensors that are in your Vehicle now. We can take the guesswork out of what sensors you need. The TPMS system in the Ferrari is a lot less complex then it may seem and many models use the same sensors. Click here to go to the sensors on our page. Feel free to email us with questions or inquiries at [email protected] and we'll be happy to assist you. |