Home > Chrysler > CROSSFIRE > 2004 - 2008 >

2004 - 2008 Chrysler CROSSFIRE TPMS Sensor Schrader 52088990AC 433MHz
2004-2008 Chrysler CROSSFIRE TPMS Sensor OE Schrader 52088990AC 433MHz
Item may differ from photo
 
Our Price: $999.98
Manufacturer Chrysler
Model: Crossfire


Availability:: Usually Ships in 24 Hours
Product Code: 9028-03
Qty:

Description Service Kit TPMS Relearn
 

2004 - 2008 Chrysler CROSSFIRE TPMS Sensor OE Schrader 52088990AC 433MHz

  • 2008 Crossfire Coupe
  • 2008 Crossfire Roadster
  • 2007 Crossfire Coupe
  • 2007 Crossfire Roadster
  • 2006 Crossfire Coupe
  • 2006 Crossfire Roadster
  • 2005 Crossfire Coupe
  • 2005 Crossfire Roadster
  • 2004 Crossfire Coupe
All sensors are sold as complete units. Compatible with most stock and aftermarket rims. Please contact your wheel manufacturer to confirm fitment. If you're unsure about fitment and compatibility, please provide us with the VIN# (vehicle identification number) of your vehicle. Doing so will help us confirm and guarantee TPMS fitment. The VIN# can be found on the vehicle placard on the door sill on the drivers side.

If you have any questions, please feel free to email us at [email protected]
TPMS Information
  • The TREAD (Transportation Recall Enhancement, Accountability and Documentation) Act requires that 100% of all passenger cars, light trucks, and buses manufactured in the United States after September 2007 be equipped with a tire pressure monitoring system.

    Vehicles must be equipped with:
    • A tire pressure monitor in all four tires
    • A system that operates when the vehicle is on and warns the driver when tires are under-inflated by 25% or more.
    • A system that alerts the driver of a tire pressure monitoring system malfunction
    • A TPMS warning light that stays on until tire pressure has been inflated to vehicle specifications
    • A "bulb check" of the TPMS warning light on the instrument panel that blinks when the ignition is turned on
    • Vehicle owner's manuals that contain warnings about incompatible replacement tires for the vehicle
    To learn more about the TREAD Act, click here

Average Customer Review: Average Customer Review: 3 of 5 3 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
3 of 5 Dealership diagnostic tool MANDATORY with this November 14, 2017
Reviewer: Clint from Michigan  
If this fixed TPMS sensor ID unit is used to replace a Chrysler Crossfire sensor it will be NECESSARY to also use Chrysler Dealership diagnostic tool DRB III with a Crossfire-Sprinter Multiplexer cable and the Crossfire software card to get the vehicle into TPMS sensor relearn mode. Cloning previous sensor IDs into Schrader EZ-Sensors is the only way to avoid this.

Was this review helpful to you?